NEC-Untagged Calls to Common mailbox

NEC-Untagged Calls to Common mailbox

Calls can enter the InMail system as either:


§Tagged calls    ( Call gets bounced to InMail via a call forward from an extension )

§Untagged calls ( Call enters the VM from  a Non extension e.g. from IRG 1, or VM box doesn’t exist )

 

Tagged calls enter the Inmail and are processed by the relevant mail box


Untagged calls enter the Inmail they are then processed via the following:


  In this example we will change from the default “routing Mail box to a personal Mail Box

47-10-01    Trunk to Answer table ( what trunk did the call com in from ) Default Table 1

47-11-01   CHECK – Bypass Answer Schedule Override

47-11-02  SET to Station Mailbox

47-11-03  SET to 66

47-02-01  ( mailbox 66 ) SET mailbox number to 202    ( as convention I use 202 for Night Mailbox )

    • Related Articles

    • NEC SV9100 SL2100 Terminate to Voicemail

      Terminate calls immediately to Voicemail This call flow is how to program a NEC to terminate a call immediately to Voicemail, quite often used for a night destination. Create a Virtual extension, Forward that extension to voicemail , terminate the ...

    • NEC SV9100 SL2100 Overflow calls to delay group then to Voicemail ( PSTN , Non DID )

      This call flow is how to program a NEC to terminate incoming calls one of a few extensions then overflow to more extensions, finally to Voicemail SV9100 CP20 & SL2100 V2.00+ have added delay members within a ring group, Set the final delay timer to ...

    • NEC SV9100 SL2100 Voicemail Dial Options

      Dial options to dial out of Voicemail NOTE: Customer requirements: Call to be answered by Voicemail , however client wants the option for the caller to dial out to a mobile, or leave a message. Programming: Create 2 Virtual extensions: PRG 11-04 , ...

    • NEC SV9100 SL2100 Overflow calls within a ring group or to another ring group

      This call flow is how to program a NEC to terminate incoming calls one extension then overflow to more extensions New Method: V9100 CP20 & SL2100 V2.00+ have added delay members within a ring group, however the old method is still available and handy ...

    • NEC SV9100 SL2100 Basic DDI Programing Overflow to VM with day night messages

      This article is for ISDN / SIP trunks ONLY , Analogue trunks can not use Direct Indial Direct Indial It is recommended for all SIP trunking that Direct Indial is set up for all channels, even if you only have one number, this prevents phish attempts ...