NEC SV9100 CP10 to CP20 Conversion Process
SV9100 CP10 to CP20 Migration
LIC Server - Convert Lic & download Lic. ( please refer to attached article from NEC Australia )
Connect and download database using PCPro ( CP10 )- Save the database.
Connect and download all recorded greetings using web browser ( VRS & Mail boxes )
TIP: To save customer down time take a spare chassis to site with you to prep the new CPU , performing the following tasks “off line” & swap the CPU blade once complete.
Power system down and physically remove all cards from system
Insert only the CPU ( with VoIP card if required ) and power on
Open PCPro ( CP20 ) , File > Open …open your saved CP10 database
Connect to the CPU ( CP20 ) & Perform a FULL Upload , including blade config when prompted
Upload Lic ( Web Pro or PCPro )
Upload saved recordings ( Web Pro )
Re-insert all blades back into same position
***if you have expansion cabinets the BS10 must be upgraded to a BS20, the CP20 will not boot up with a BS10 installed***
Related Articles
NEC SV8100-SV9100 Conversion Process
LIC Server - Convert Lic & download Lic. NOTE: The license migration supplies 16 voicemailbox users. Connect and download database using SV8100 PC Pro - Save the database. Connect and download all recorded greetings using web browser ( VRS & Mail ...NEC SV & SL Licensing guide
Obtaining License from NEC License Server ( LMS ) Applying a license involves a few steps Get you HWKC from your NEC CPU (if existing skip this step) Create the new Customer (if existing skip this step) Create the new Customer Location (if existing ...NEC EHS Setup notes for APN-91 SV9100 and SV 8100
EHS Headset Release Notes for the DT330/730, DT430/830 and DT750 terminals Table of Contents EHS HEADSET DESCRIPTION 3 FEATURES 3 PART LIST 4 EHS CABLE PART NUMBER 4 EHS PICTURE 4 PLANTRONICS COMPATIBILITY 5 CS MODEL 5 3.2 SAVI 700 5 4.0 SYSTEM ...NEC - Sip Trunks Vonex-
How to add Vonex to NEC SL/2100/SV9100 Remote Pre-requisite: SIP ALG disabled on the customers router Check SIP trunk credentials using a soft phone app, this will save a lot of time. Hardware / License required: SV9100: Quantity Description SV9100 ...NEC-CP10 lic to CP20 lic process LMS
SV9100 CPU CP10 license migration to SV9100 CPU CP20. The license migration of an existing customer on SV9100 CPU type CP10 to CPU type CP20 is a simple process using the License Management Server, version 11.xx and above. LMS SV9000 migration ...