Yeastar - Manual Register Polycom Handset - Trio 8800
Manual Register Polycom Handset - Trio 8800
The following guide was built using Polycom handset and used to provision a Trio 8800
Handset Access - Login
1. Login onto device via IP Address
2. Default PW = 456
Line Configuration
Once logged in
1. At the top navigation bar, go to Settings -> Lines.
2. Select a Line 1 and complete the following settings.
In the Identification section, enter the basic information of the extension.
• Display Name and Address: Enter the extension number.
• Label: Enter the name associated with the account, which will be displayed on the phone screen.
In the Authentication section, enter the registration information of the extension. (captured from extension with Yeastar)
• User ID: Enter the registration name of the extension.
• Password: Enter the registration password of the extension.
In the Server 1 section, enter the PBX information.
• Special Interop: Select Standard.
• Address: Enter the IP address / domain name of the PBX. My example = cpdsupport.au.ycmcloud.com
• Port: Enter the SIP registration port of the PBX. (5061 if using TLS) RECOMMENDED
• Transport: Select the transport protocol of the extension.
Ensure TLS is activated on PBX and Extension in Yeastar
At the top navigation bar, go to Settings -> Provisioning Server
• Server Address: Enter full URL of provisioning server (Obtained from Yeastar) Within this example: https://cpdsupport.au.ycmcloud.com:443/api/autoprovision/yywZnF79d8Qy6Fgsd
At the top navigation bar, go to Settings -> Network -> TLS -> TLS Applications and Within area “Common Name Validation” Uncheck SIP
At the bottom of the webpage, click Save.
Go to navigation bar Utilities -> Restart phone
Device will reboot, you can see 
displayed at the extension account
on the phone screen if provision has occurred successfully.
Related Articles
How to Register a Yealink Handset on Yeastar Cloud PBX Using Yealink RPS
How to Register a Yealink Handset on Yeastar Cloud PBX Using Yealink RPS Access the Yeastar cloud PBX Select Extension and Trunk – Extension – Add Configure the required information for the User Select Save Select Auto Provisioning – Phones – Add ...Yeastar - Poly Edge E series keys not working on handset
It has come to our attention that there is an issue with the newer version poly EDGE E series handsets and physical buttons on the phone not working keys affected are Home , 1,2,3,4,5,6,7,8,9,0,#,* and volume are non responsive although BLF keys ...Yeastar - Manual Mode Setting - Setting answer points manually - Multiple answer options
Setting answer points manually - Multiple answer options If there is a requirement to have multiple answering location outside (3) Day / Night / Lunch you can utilize the time periods within the incoming call routes. Configuration Within Call Control ...Yeastar - DHCP_Auto Provision Alcatel-Lucent Phones on Yeastar P-Series Cloud PBX
DHCP_Auto Provision Alcatel-Lucent Phones on Yeastar P-Series Cloud PBX Auto Method The following is for all models 1. Copy the provisioning link from device added into Yeastar cloud PBX, 2. .Add option 66 on the router for DHCP server settings 3. ...Yeastar Disaster Recovery Setup
Yeastar Disaster Recovery Setup When the system is ordered (disaster recovery will be added as an additional license Once ordered you will be provided with two Activation Codes (example below) Deploy the Primary Server then deploy the Redundancy ...