NEC - Using Different Times on different days Auto night mode setup

NEC - Using Different Times on different days Auto night mode setup




Using different Times on different days Auto night mode 


scenario

Mon-Thurs 8-5 open 

Friday :7:45-12 - open

Sat sun closed night

12-01-02  Auto Ticked

A screen shot of a computerDescription automatically generated


For Monday to Thursday we are going to use Night mode service group 1 Table 1 (Operation mode is 1 for day and 2 for night )

A screenshot of a computerDescription automatically generated


For Friday we are suing Night service group 1 table 2 ((Operation mode is 1 for day and 2 for night )

A screenshot of a computerDescription automatically generated


For Sat and Sun (closed all day ) we are using night service group 1 table 3 (Operation mode is 1 for day and 2 for night so for weekends set to 2 for all day  )

A screenshot of a computerDescription automatically generated

12-03 Monday to Thursday use table , Fri table 2 and Sat and Sun table 3 

A screenshot of a computerDescription automatically generated


Assign Night group 1 mode to the Lines in 12-06

A screenshot of a computerDescription automatically generated

Allow toggle between the modes in 12-08


A screenshot of a computerDescription automatically generated

You can change the name that appear on the phones when the mode changes ( Blank shows nothing ) as we don’t want Mode 2 to display anything on all the handsets 

A screen shot of a computerDescription automatically generated


test


    • Related Articles

    • NEC SV9100 SL2100 Night Switch

      SL2100 & SV9100 Mode Switch NEC has 8 modes of operation, the 8 modes effect: Inbound, call routing ( non DDI ) Inbound, trunk group to translation table ( DDI ) Outbound ( trunk group routing ) Class of service Toll Restriction Classes By default ...
    • NEC -Changing operator Destinations using Day/Night mode key

      Changing operator using Day/Night modes- handy for hotels with after hours going to offsite answer service Giving extensions the ability to make an internal call that routes as if it were an incoming DDI call Loopback Use: The SL2100 has a built in ...
    • NEC SV9100 SL2100 Basic DDI Programing Overflow to VM with day night messages

      This article is for ISDN / SIP trunks ONLY , Analogue trunks can not use Direct Indial Direct Indial It is recommended for all SIP trunking that Direct Indial is set up for all channels, even if you only have one number, this prevents phish attempts ...
    • NEC SV9100 SL2100 Terminate to Voicemail

      Terminate calls immediately to Voicemail This call flow is how to program a NEC to terminate a call immediately to Voicemail, quite often used for a night destination. Create a Virtual extension, Forward that extension to voicemail , terminate the ...
    • NEC SV9100 SL2100 Hotel Motel PMS integration

      NEC SV9100 SL2100 Hotel Motel PMS intergration