Yeastar - Manually override the automatic night mode

Yeastar - Manually override the automatic night mode


Manually override the automatic night mode


  1. Allow the user or extension group access this feature go to Call Features/Feature Code assign an extension group or user to be allowed to night switch

A screenshot of a computerDescription automatically generated




Enable or Disable Automatic Reset of Time Condition

By default, if users have overridden time condition and don't clear the time condition override manually, PBX will automatically reset time condition in next period. You can decide whether to auto reset time condition or keep the time condition after overriding.

Enable automatic reset of time condition

To make the system go back to the normal schedule after users override time condition, follow the instructions below.

Procedure

  1. Log in to PBX web portal, go to Call Features > Feature Code.
  2. Scroll down to Switch Business Hours and Holidays Status section.
  3. Unselect the checkbox of Keep the Business Hours Status or the Time Condition after Switching.

A screenshot of a computer screenDescription automatically generated

  1. Click Save and Apply.

Result

When it comes to the next starting point of business hours, outside business hours, or holidays, the system will reset time condition and go back to the normal schedule. 

For more information, see Automatic Reset of Time Condition.

Disable automatic reset of time condition

To make the system keep the status after users override time condition, follow the instructions below.

Procedure

  1. Log in to PBX web portal, go to Call Features > Feature Code.
  2. Scroll down to Switch Business Hours and Holidays Status section.
  3. Select the checkbox of Keep the Business Hours Status or the Time Condition after Switching.

A screenshot of a computer screenDescription automatically generated

  1. Click Save and Apply.





Now assign a night key to the phone



now reprovsion the phone to make the key take effect










    • Related Articles

    • Yeastar - Manual Mode Setting - Setting answer points manually - Multiple answer options

      Setting answer points manually - Multiple answer options If there is a requirement to have multiple answering location outside (3) Day / Night / Lunch you can utilize the time periods within the incoming call routes. Configuration Within Call Control ...

    • Night Mode

      Night Mode Time Condition (Night Mode) allows you to route calls to various destinations at a different time like business hours, outside business hours, and holidays. System can be configured with an Automatic Time control, so you don’t have to ...

    • Yeastar - Provisioning Avaya J series handsets Manually

      Yeastar - Provisioning Avaya J series handsets Manually Auto Provision Avaya Phone in Yeastar Yeastar - Auto Provisioning - Phones Add the phone Configure Avaya J Series Power on the Avaya J Series Note: If the phone has already been used, you will ...

    • Yeastar - PBX to Yeastar NeoGate TA800 Gateway (Peer Trunk Mode)

      Yeastar P-Series to TA800 Complete Peer Trunk Integration Guide Document Purpose This document details a complete integration blueprint to deploy a Yeastar TA800 8-Port FXS gateway alongside a Yeastar P-Series PBX without using extension licenses. It ...

    • Activate and Initially Set up Yeastar P-Series Software Edition

      Activate and Initially Set up Yeastar P-Series Software Edition After you install Yeastar P-Series Software Edition, you need to activate and finish initial configurations for the system using the Installation Wizard. Prerequisites You have accessed ...