Yeastar - Group / Queue Name Display - removal

Yeastar - Group / Queue Name Display - removal

Group / Queue Name & DDI Display - Removal

Enable or disable the display of call feature name

The call feature name refers to the name of an IVR, a Ring Group, a Queue, or a Call Flow and the ability to show or hide from the display of devices on incoming calls. This may be beneficial where you only want to show the incoming caller ID on devices and not the associated group / queue..

  1. Log in to PBX web portal, go to PBX Settings -> Preferences
  2. In the Distinctive Caller ID Name section, configure the followings:
      1. To display Queue names, Ring Group names, IVR names, and Call Flow names, select the checkbox of Display Call Feature Name.
      2. To hide Queue names, Ring Group names, IVR names, and Call Flow names, unselect the checkbox of Display Call Feature Name.
                          
      3. Click Save and Apply.


Enable or disable the display of trunk DID/DDI name

  1. Log in to PBX web portal, go to PBX Settings > Preferences.
  2. In the Distinctive Caller ID Name section, configure the followings:
      1. To display trunk DID/DDI name, select the checkbox of Display DID/DDI Name.
      2. To hide trunk DID/DDI name, unselect the checkbox of Display DID/DDI Name.
                       








       3. Click Save and Apply.

    • Related Articles

    • Yeastar - Ring Group Creation

      Log in to PBX web portal, go to Call Features > Ring Group, click Add. Configure the ring group. Number: Enter a virtual number for callers to access the group. The default ring group number range is from 6300 to 6399. Name: Enter a group name to ...

    • Yeastar- Button to set alternative answer point for ring group.

      Customer requires a button to Forward a Ring group to an alternative answer point (mobile, vmail). We'll use "going to the pub, divert ring group to Mobile". Additionally referenced as "Break Mode". So our normal config is using business hours on DDI ...

    • Yeastar P-Series Self-Hosted Migration to Different Platform

      Yeastar P-Series Self-Hosted Migration to Different Platform On the current Yeastar P Series PBX Check for new firmware and if available upgrade the Yeastar to the latest firmware Select Maintenance – Upgrade – Check for New Firmware Select Upgrade ...

    • Yeastar - Avaya Custom Configuration File - Latest File_12_09

      Avaya Custom Configuration File - Latest File The latest Custom Configuration File for Avaya J series can be downloaded. As updates are release features are added to the configuration file to expanding on all previous additions. Links to Guides for ...

    • Yeastar - 3CX Migration to Yeastar

      3CX Migration to Yeastar The database of a 3CX can be extracted and loaded into Yeastar PBX. The process consists of 4 steps: Download Backup File from 3CX PBX Delete end devices for auto provisioning onto Yeastar and disable SIP trunks Upload the ...