NEC SL2100 Mobile extension - twinning
Mobile extension , AKA Twinning
This feature requires a license per twinning extension , the system comes with 4 already licensed
Make sure you have a valid extension number in PRG 11-02 against an un-equipped end ( example port 99 = extension 199 )
Program that extension number to point to a speed dial location PRG 15-22
Set the speed dial location assigned to the external number
Use:
Direct a call to internal extension 199, the call will be routed to the speed dial destination.
Related Articles
NEC SV9100 Mobile extension -twinning
SV9100 - Mobile Twinning Connect to NEC SV9100 via PC Pro ( PC pro must be used as this software can view un-equiped ends ) The SV9100 MUST have a Mobile Extension license per extension In this example I’m using extension 199 as the mobile extension ...NEC -ST500 Mobile Client Explained
NEC SV & SL Licensing guide
Obtaining License from NEC License Server ( LMS ) Applying a license involves a few steps Get you HWKC from your NEC CPU (if existing skip this step) Create the new Customer (if existing skip this step) Create the new Customer Location (if existing ...NEC SL2100 Swapping Extenion via handset with feature code
NEC- Swapping Extensions on system via handset with feature Code 95-05 add a pin number to the handsets 20-13-42 make sure extension data swap is enabled in your class of service 11-15-14 remove 740 from modem access as it no longer relevant and put ...NEC-SL 2100 After reboot SIP trunks/ IP phones dont come back up - License error
NEC- After System Reboot /power cycle lines and extension do not come back up - often you will receive a license error on screen of phones - Sip Trunks still show as registered in DIM trace but you cannot seize a trunk for calling out & inbound ...