NEC- Comparing a current database against a default one - Faultfinding
NEC – What changes are on the System and compare to default- Faultfinding
Often on system ( especially on one you have inherited ) it is very hard to see what changes have been made on the system by previous installers
A simple way around this is to compare the data base to a default one
To do this
- Using PC pro log into a system or open a save
- Select reports
3.select Non Default Value .
Select all and generate
This will now show you the system database against a default one
Related Articles
NEC-Factory Default SL2100/SV9100
Default System With system power off system. 1.Hold down the Load Button for 10 seconds while powering up the system, then release. ‒SL2100: Alarm light will flash when ready to release ▪ •No Licenses are removed during this process. •This procedure ...NEC - Call2teams
How to add an Call2teams user to a SV9100 / SL2100 Pre-requisite: A Static Public IP for the NEC system Port forward (default UDP 5070) on your external router to the LAN address of the CPU (10-12-09) Port forward range (UDP 10020-10531) on your ...NEC SV9100 SL2100 -- ST500 APP
How to program a ST500 APP to a SL2100 / SV9100 Pre-requisite: A Static Public IP for the NEC system Port forward "Register Port" on your external router to the LAN address of the CPU (10-12-09) Change the "Register Port" PRG 84-20-01 from 5070 to a ...NEC SV9100 New Install Best Practice
Best Practice for new Installs The SV9100 CP20 has introduced portal mode on the DT900 handsets , all DT900’s will show the following screen by default. The 8 Icons are basically speed dials that are hard coded to the handset (not in system ...NEC- Intermittant one way speech on mobiles with SIP Trunks
NEC- Intermittent one way speech on Mobiles make sure the maximum audio frame size is set to 20 ms 84-13-01 84-12-07 84-13-33 84-13-38 make sure 84-13-28 g.711_PT is pirority