NEC-Factory Default SL2100/SV9100

NEC-Factory Default SL2100/SV9100

Default System

With system power off system.

1.Hold down the Load Button for 10 seconds while powering up the system, then release.

‒SL2100: Alarm light will flash when ready to release

▪

•No Licenses are removed during this process.

•This procedure will default the database + format all mail boxes& VRS greetings.

    • Related Articles

    • NEC SV & SL Licensing guide

      Obtaining License from NEC License Server ( LMS ) Applying a license involves a few steps Get you HWKC from your NEC CPU (if existing skip this step) Create the new Customer (if existing skip this step) Create the new Customer Location (if existing ...

    • NEC- Comparing a current database against a default one - Faultfinding

      NEC – What changes are on the System and compare to default- Faultfinding Often on system ( especially on one you have inherited ) it is very hard to see what changes have been made on the system by previous installers A simple way around this is to ...

    • NEC - Sip Trunks Vonex-

      How to add Vonex to NEC SL/2100/SV9100 Remote Pre-requisite: SIP ALG disabled on the customers router Check SIP trunk credentials using a soft phone app, this will save a lot of time. Hardware / License required: SV9100: Quantity Description SV9100 ...

    • NEC - Show Unequipped ends IP ext in PC Pro by default

      NEC-Show un-equipped end (IP ext. and MLT/SLT) in PC pro by default You can set the default when you login into PC Pro to always show un-equipped ends

    • NEC SL2100 Password recovery

      There is no procedure for password recovery for the SL2100 product.