Yeastar - Display Different CLI on Outbound Calls

Two options

1. thru on outbound routes in this case if i dial 8XXXXXXXX the call will show 0735587044 or normal dial 0735587043

2. you can select an outbound CLID via linkus

• Related Articles

• Yeastar - Outbound Route - Dial Pattern

  Outbound Dial Pattern Dial Pattern Components A dial pattern comprises Pattern, Strip, and Prepend. Pattern Defines which dialed numbers will be matched. The Pattern field allows a full number or special characters that will match specific numbers. ...

• Yeastar- Outbound Caller ID

  In Yeastar P-Series Cloud Edition, you can configure outbound caller ID based on the following features: Emergency Numbers Outbound Route Trunk Extension Customize Outbound Caller IDs This topic describes different ways to customize outbound caller ...

• Yeastar- Outbound caller ID

  Outbound caller ID Outbound caller ID is the phone number that will be displayed on the called party's phone when an extension user makes an outbound call. Each trunk has a main number, the number appears when an outbound call is received by a ...

• Activate and Initially Set up Yeastar P-Series Software Edition

  Activate and Initially Set up Yeastar P-Series Software Edition After you install Yeastar P-Series Software Edition, you need to activate and finish initial configurations for the system using the Installation Wizard. Prerequisites You have accessed ...

• Yeastar - Outbound Call Playing MOH

  Outbound Call Playing MOH Issue: Identified on Symbio SIP trunks that on outbound call local music on hold is heard not ring tone. Remedy: On the SIP trunk enable "Ignore 183 Message without SDP". This is located Extension and Trunk -> Trunk -> ...