Yeastar - Outbound Route - Dial Pattern

Yeastar - Outbound Route - Dial Pattern

Outbound Dial Pattern

Dial Pattern Components

A dial pattern comprises Pattern, Strip, and Prepend.

Pattern

Defines which dialed numbers will be matched.
The Pattern field allows a full number or special characters that will match specific numbers. The following table shows descriptions of the allowed characters in the Pattern field.
PatternDescription
XMatch any digit from 0 -9.
ZMatch any digit from 1- 9.
NMatch any digit from 2 - 9.
[###]Match any digit in the bracket.

Example: [123] matches the numbers 1, 2, or 3.

Note:Range of numbers can be specified with a dash, example [136-8] matches the numbers 1, 3, 6, 7, or 8.
.Match one or more numbers.

Example: 9011. matches any numbers starting with digits 9011 (excluding 9011 itself).

!

Wildcard ! has different meanings for SIP extensions and FXS extensions.

  • If the call is made by a SIP extension, ! matches one or more characters.

    Example: 9011! matches any numbers starting with 9011 (including 9011 itself).

  • If the call is made by an FXS extension, ! limits the digit and number that users dial.

  • Example: 9011! only matches the dial number 9011.



Strip

Defines how many digits will be stripped from the beginning of a dialed number when the dialed number successfully matches a Pattern.
Notes
Example:
If you set Pattern as 9. and set Strip as 1.
If a user wants to call number 1588902923, the user should dial 91588902923. The PBX will strip digit 9 from the dialed number, and call the number 1588902923.

Prepend

Defines which digits will be added at the beginning of a dialed number when the dialed number successfully matches a Pattern.
Notes
Example:
08 is the are code for Perth, W.A For users who often make calls to the city you can set Prepend as 08.
In this case, if the user wants to call number 0865432345, the user should dial 65432345.





    • Related Articles

    • Yeastar - PBX to Yeastar NeoGate TA800 Gateway (Peer Trunk Mode)

      Yeastar P-Series to TA800 Complete Peer Trunk Integration Guide Document Purpose This document details a complete integration blueprint to deploy a Yeastar TA800 8-Port FXS gateway alongside a Yeastar P-Series PBX without using extension licenses. It ...

    • Activate and Initially Set up Yeastar P-Series Software Edition

      Activate and Initially Set up Yeastar P-Series Software Edition After you install Yeastar P-Series Software Edition, you need to activate and finish initial configurations for the system using the Installation Wizard. Prerequisites You have accessed ...

    • Yeastar - Multiple trunks with different regsitrations - outbound dialing policy/ push DSS to dial out different trunks

      Yeastar - Multiple trunks with different registrations ,outbound dialing rules , DSS key selection to dial out i.e 2 companies on same system with 2 separate trunks Create 2 x trunks Create your extensions Create 2 x extension groups and add required ...

    • Yeastar - Inbound Route

      Inbound Route Creation Log in to PBX web portal, go to Call Control > Inbound Route, click Add. In the Name field, enter a name to help you identify it. Optional: Set an "alert info text" to add to Alert-info header in INVITE request for inbound ...

    • Yeastar-Generic Sip Trunk Config Guide

      How to configure SIP registered trunk with Yeastar P-Series PBX System Configure a SIP Trunk 1. Create an Account with the SIP trunk provider. To start with, you need to have an account from your SIP trunk provider. 2. Add a SIP Trunk in P-Series PBX ...