NEC-SL 2100 -V5.21.03 only Caller ID passthru Access 4 with scripts

NEC-SL 2100 -V5.21.03 only Caller ID passthru Access 4 with scripts

ERN - SL2100_v5.21.03_Main_Software_Release-1.0(AU)


·      SL2100 software v5.21.03 operation for Access 4 SIP Trunks requires Diversion header Prg 84- 39-42=2, Prg 84-39-05=6 to support Caller ID pass thru for forwarded and diverted calls. The following programing is required to enable the feature


SET    10-67    (00,0,0)    "1"
SET    10-67    (00,0,1)    "1.1.1.1"

SET    10-68    (00,0,0)    "1"
SET    10-68    (00,0,1)    "1"
SET    10-68    (00,0,2)    "4"

SET    10-28    (00,0,0)    "a4uc.com.au"
SET    10-28    (00,0,1)    "tkreg"
SET    10-28    (00,0,4)    "1"

SET    10-29    (00,0,0)    "1"
SET    10-29    (00,0,4)    "1"
SET    10-29    (00,0,10)    "tkreg.a4uc.com.au"
SET    10-29    (00,0,11)    "a4uc.com.au"
SET    10-29    (00,0,12)    "tkreg"
SET    10-29    (00,0,13)    "7"



SET    10-36    (00,0,0)    "1"
SET    10-36    (00,0,1)    "number"
SET    10-36    (00,0,2)    "number"
SET    10-36    (00,0,3)    "Password"


.

1.     Set Prg 14-01-24 enable for all Access 4 SIP trunk lines

2.     Set Prg 21-17 enter SIP service GDN for All Access 4 SIP trunk lines.

3.     Set Prg 21-19 required to be set if normal outgoing call from extension requires to send personal DID number.

4.     Prg 99-03-68 = 0 (Caller ID) ( Handset Programming only) and via Webpr/PcPro set Prg 20-25- 21=Caller ID.

5.     Set the following SIP Scripts: PRG 84-39-03 = 1

PRG 84-39-05 = 6 (New Script Function) PRG 84-39-06 = 1

PRG 84-39-08 = 1

PRG 84-39-09 = 1

PRG 84-39-10 = 1

PRG 84-39-12 = 1

PRG 84-39-14 = 1

PRG 84-39-23 = 1

PRG 84-39-28 = 1

PRG 84-39-42 = 2 ( New Script Function)

 

 

 

 

 

PRG84-39-05

 

 

 

Out Going Call

 

 

 

Invite Message

 

 

P-Asserted- Identity

P-Preferred- Identity

 

 

 

 

6:Mode 6

This PRG can select the following mode about "P-Asserted-Identity"/"P-Preferred- Identity"

 

Mode 6:

Use P-Asserted-Identity Using Trunk Caller Party Number (PRG21-17.)

 

 

 

 

 

 

 

 

PRG84-39-42

 

 

 

 

 

 

 

Outgoing Call

 

 

 

 

 

 

 

Invite Message

 

 

 

 

 

 

 

Diversion Header

 

 

 

 

 

 

0:Mode 0

1:Mode 1

2:Mode 2

This PRG can control to add the Diversion Header in Invite message. Note: If this PRG is set Mode 1 or Mode 2, "Diversion: <sip:[selectable]@ IP address or Domain>;reason=unconditional" is set in this field.

Mode 0

Does not add the Diversion Header in Invite message.

Mode 1

Add the Diversion Header in Invite message. Set PRG21-19 as User Part. Mode 2 [v5.21.03 or Higher]

Add the Diversion Header in Invite message. Set PRG10-36 as User Part.

script attached

    • Related Articles

    • NEC - Enable Caller Id on SLI port for analog extension

      NEC- Caller ID display on Analog handset in SLI port To display caller ID on incoming call to an analog phone on the SLI port 15-03-09 – enable Caller ID Function

    • NEC-Scripts - Access 4 SIP trunks

      I have included 3 x scripts 2 for the latest version 5.21 which allows caller ID pass thru , the last script is for older firmware versions will set up lines 1-4 as SIP trunks add SIP Server just need to add credentials in 10-36

    • NEC -Unable to pre-append 0 to Caller ID

      Caller ID Edit mode Fault: Can not add 0 to the beginning of the CLID being presented ( only 9 digits being sent ) The value in 10-02-03 will pre append Caller ID, this is used when the carrier sends Caller ID as 9 digit format. This will work with: ...

    • NEC-Show Caller Id on screen without the phone physically ringing on incoming ring group

      NEC-Show Caller Id without the phone ringing on incoming ring group - Be Aware the phone is still actually ringing , so if you pick up the handset you will answer the call Any other call coming to the extension different ring group VE or internal ...

    • NEC - Using Scripts

      Using Scripts Scripts are a quick fast way to add data to your phone system As well as you may often HAVE to add scripts to your system to get things to work To upload a scripts !!!!!!!!!SAVE YOUR DATA BASE BEFORE YOU START !!!!!! 1. Connect to the ...