Factory Resetting Poly Edge E Series Phones with out knowing Password

Factory Resetting Poly Edge E Series Phones with out knowing Password

Follow these instructions to reset a Poly Edge E Series phone to the factory default state.

Instructions

  1. Power the phone on. Depending on the Edge E model, the Handsfree and Headset buttons should illuminate.

    Image of the above instructions  Image of the above instructions

  2. When the lights turn off, press the 1, 5, and 3 keys at the same time. Hold them until a menu pops up asking to enter a password.

    Image of the above instructions

  3. Enter the phone MAC address that is found on the back of the phone (ex: 0004f28619dc).

    Image of the above instructions

    If the MAC address contains letters press the first button on the left at the bottom of the screen to choose the correct mode for entering the letters. The button will change to one of the following when you press it:

    1 -> Aa when entering numbers
    A -> a1 when entering capital letters
    a -> 1A when entering lowercase letters

    Example: To enter a lowercase "c" you will press the button until it shows a -> 1A.  Then to enter the "c" in your MAC address you will press the 2 button on the key pad three times to get to the "c" (a,b,c).

    Image of the above instructions

  4. Press Ok after entering the MAC address. The phone will reboot three or four times over the next five to ten minutes. Do not press any keys during this time! Just wait for the phone to go through the whole process.

    • Related Articles

    • Manufacturer Direct Online Warranty Claim Process - Poly

      Manufacturer Direct Online Warranty Claim Process – Poly ver. FEB 2024 The quickest way to receive a replacement headset, is to lodge a warranty claim, and request an advanced replacement direct with HP support. Browse to Poly product warranty ...

    • Notice- Spectralink 7000 series EOL

      The Spectralink 7000 series are EOL and have been replaced by the new S Series Handsets. There are 3 Models only… S33, S35, S37 The S35 is the recommended replacement to the 7722 Handset. *** IMPORTANT INFO *** Infrastructure software requirements to ...

    • CommsPlus On-line RA Process

      Returns Process and Policy Warranty and actioning Order errors for equipment sourced through CommsPlus Distribution. Return can be requested either via: Link on Webstore Or https://prc.commsplus-distribution.com.au/admin/forms/returns/ (You’ll need ...

    • Manufacturer Direct Online Warranty Claim Process - EPOS

      Manufacturer Direct Online Warranty Claim Process – EPOS ver. FEB 2024 The quickest way to receive a replacement headset, is to lodge a warranty claim with the authorised service agent, Auroz. Browse to Auroz EPOS product warranty registration ...

    • Manufacturer Direct Online Warranty Claim Process - Yealink

      Manufacturer Direct Online Warranty Claim Process – Yealink ver. FEB 2024 The quickest way to receive a replacement headset, is to lodge a warranty claim, and request the warranty replacement directly with Yealink support. Browse to Yealink product ...